QuikWater Interactive Selection Guide

Which QuikWater system is right for your application? We make it easy for you to find out with our Interactive Selection Guide.

First, you'll need some information at hand:

  1. Desired temperature of hot water.
  2. Your desired flow rate.
  3. The temperature of your cold water supply.

Now, enter that information in the fields below and see which QuikWater direct-contact water heating system is ideal for your operation.

Please fill all required fields

Desired hot water temperature
Desired flow rate
Cold supply water temperature
BTU Required    
       
Heater Line Required
Heater Model Size    


You can also determine the preliminary heater size to meet your requirements by using the chart below. You'll need the following information at hand:

  1. Determine your total hourly water using during peak demand.
    For example: 6000 gallons ÷ 60 minutes = 100 GPM.
  2. Determine the water temperature rise required.
    For example: Inlet 60°F, outlet need 160°F = temperature rise of 100°F
Model Tank
(Gals.)
GPM Flow at Indicated Temperature Rise °F
20°F¹ 40°F¹ 60°F 80°F 100°F 120°F¹ 140°F
600 70 60¹ 30¹ 20 15 12 10 8
1000 100 100¹ 50¹ 33 25 20 16 14
1750 175 175¹ 87¹ 58 43 35 29 25
2500 200 250¹ 125¹ 83 62 50 41 35
3500 340 350¹ 175¹ 117 87 70 58 50
5000 425 500¹ 250¹ 167 125 100 83 71
6000 540 600¹ 300¹ 200 150 120 100 85
8000 775 800¹ 400¹ 267 200 160 133 114
10.0 1,050 1000¹ 500¹ 333 250 200 166 142
12.5 1,175 1250¹ 625¹ 417 312 250 208 178
15.0 1,400 1500¹ 750¹ 500 375 300 250 214
17.5 1,750 1750¹ 875¹ 583 437 350 291 250
20.0 1,900 2000¹ 1000¹ 667 500 400 333 285
25.0 2,350 2500¹ 1250¹ 833 625 500 416 357
30.0 2,750 3000¹ 1500¹ 1000 750 600 500 428
35.0 3,225 3500¹ 1750¹ 1167 875 700 583 500

Important Notes:

  1. Variations in the QuikWater heater design may be required to achieve all flow parameters. Please consult us if required temperature is less than 60°F.
  2. Standard ratings are based on 1000' elevation. Burners are subject to 4% derivation for each additional 1000'.
  3. Tabulated flow rates represent 99% efficient heater operation when inlet water temperature is 60°F or below.
  4. A.  Model x 1000 = BTU/hr capacity through Model 8000, or
    B.  Models 10.0 through 35.0 x 1 million = BTU/hr capacity.