Products description 003

TotalArc BMS

The TotalArc BMS (Burner Management System) monitors calls for heat to improve your heater’s performance. The TotalArc BMS has both pneumatic and electrical safety control options providing remote relighting capabilities on demand.

The TotalArc BMS controls natural draft burners and monitors burner safeties. The system can be configured to monitor safeties and heat controls via electronic or pneumatic means. Safeties are continuously monitored and once a heat request is received and the pre-purge timer has expired, the lighting procedure will start, and the pilot and...

LEARN MORE

TotalArc Relighter

The TotalArc Relighter monitors your pilot light ignition system for a flame. In the event your pilot light goes out, the TotalArc Relighter relights your flame and keeps your system running the way it should. The patented design feature closes the burner fuel supply to prevent a buildup of fuel prior to the relighting process. The fuel flow is minimized until a flame is sensed in the firetube.

The TotalArc Relighter is a robust ignition system that augments the safety capabilities of a pneumatic safety...

LEARN MORE

QuikWater MegaHeater

Produces Hot Water Up to 200°F
The QuikWater MegaHeater is one serious direct-contact water heating system — engineered to produce hot water up to 200°F. The MegaHeater industrial hot water heater system is ideal for food, beverage, and other process industries that require commercial hot water on demand with no excuses.

Better than a boiler, the QuikWater MegaHeater is the number one choice for food, beverage, and other process industries that want to operate smarter, cleaner, and more energy-efficient.

QuikWater systems are the first direct-contact water heating...

LEARN MORE

Horizontal Forced Draft

TERI horizontal water-bath heaters have a capacity range from 1 MM Btu/hr. up to 15 MM Btu/hr. For low-emission requirements, TERI forced draft heaters offer an ideal solution to reduce dead gas film along the tube walls and provide superior burner control, making fine-tuning the air/fuel ratio possible to achieve efficient combustion and lower emissions.
TERI Horizontal Indirect Fired Waterbath Heater Applications

Heating natural gas prior to pressure reduction to prevent freezing of valving and instrumentation
Heating well stream fluids prior to phase separation
Heating...

LEARN MORE

Horizontal Natural Draft

TERI Natural Draft Horizontal Heaters are ideal for remote locations and locations with limited power supply. They are custom designed and engineered for each application and can be designed in single, double, or triple-burner configurations.

TERI horizontal water bath heaters are commonly used in applications where process temperatures do not exceed 170°F, including utility, gas processing, refining of oil, gas, and other industrial applications.

With capacities from 0.3 MMBtu/hr to over 15 MMBtu/hr, our expert team can conceive and construct the right TERI Horizontal Heater for...

LEARN MORE

Vertical Heaters

TERI vertical indirect fired water bath heaters are an aesthetically pleasing and environmentally safe addition to TERI’s popular horizontal glycol-water bath heaters. This design can go in an area where the noise or appearance of a standard horizontal heater may face opposition from local residents. TERI vertical heaters offer unmatched design features with a small footprint.

TERI Vertical Indirect Fired Water Bath Heater Applications

Heating natural gas prior to pressure reduction to eliminate frost formation downstream of regulation

Preventing hydrate formation in well stream fluids

Heating well stream...

LEARN MORE

QuikWater Flagship

Powerful Performance Meets Energy Efficiency
QuikWater's Flagship model is the ideal direct-contact water heating system for concrete production, commercial laundries, and the glass, textiles, car washing, food processing, government, and aviation industries, producing 9 to 2,300 gallons per minute of pure, potable, hot water.

All QuikWater systems are engineered with our innovative clean-burn combustion technology – a dry fire process that is not only safer than conventional boilers but operates with 99% energy efficiency materials for extra long life and extra low maintenance.

QuikWater Flagship water heaters...

LEARN MORE

QuikWater MultiTower

50% to 100% Backup; Increased Turndown
QuikWater's MultiTower direct-contact water heating system is an optional configuration of our original Flagship system.

The MultiTower is ideal for concrete production, commercial laundries, and the glass, textiles, car washing, food processing, government, and aviation industries, producing 9 to 2,300 gallons per minute of pure, potable, hot water.

All QuikWater systems are engineered with our innovative clean-burn combustion technology – a dry fire process that is not only safer than conventional boilers but operates with 99% energy efficiency. We also manufacture...

LEARN MORE

Hot Shot

The QuikWater Hot Shot is the new right-size solution for commercial applications that require hot water on demand with a smaller footprint. The Hot Shot delivers 6 to 16 gallons per minute of pure, potable, hot water on demand and is ideal for smaller meat packing plants, car washes, commercial laundries, and cafeteria, hospital and institutional kitchens. Engineered with our innovative clean-burn combustion technology, the Hot Shot uses a dry fire process that is safer than conventional boilers and operates with 99% energy efficiency....

LEARN MORE